Craftsman Style House Plan - 4 Beds 3 Baths 2793 Sq/Ft Plan #929-986 (2024)

This report will provide you cost estimates based on location and building materials.

2793
sqft

4
Beds

3
Baths

2
Floors

2
Garages

This plan canbecustomized

Tell us about your desired changes so we can prepare an estimate for the design service. Click the button to submit your request for pricing, or call 1-800-528-8070 for assistance.

Depth : 69' 2"

Height : 38' 10"

Width : 33' 8"

Basem*nt Unfinished: 178 sq/ft

First Floor: 1956 sq/ft height 9'

Garage: 677 sq/ft

Second Floor: 659 sq/ft height 9'

* Total Square Footage typically only includes conditioned space and does not include garages, porches, bonus rooms, or decks.

Primary Pitch : 7:12

Roof Framing : Conventional

Roof Type : Asphalt

Secondary Pitch : 12:12

Exterior Wall Finish : Siding/Stone

Framing : 2 x 4

Fireplace

Formal Dining Room

Main Floor Master Bedroom

Split Bedrooms

Walk In Closet

Breakfast Nook

Kitchen Island

Kitchenette Wet Bar

Walk In Pantry Cabinet Pantry

Den Office Study Computer

Great Room Living Room

Loft

Main Floor Laundry

Open Floor Plan

Storage Area

Vaulted / Cathedral Ceilings

Balcony

Covered Front Porch

Bedroom 2:

144 sq/ft width 12' x depth 12'

Bedroom 3:

132 sq/ft width 11' x depth 12'

Breakfast:

127 sq/ft width 12' 8" x depth 10'

Covered Front Porch:

300 sq/ft

Covered Rear Porch:

46 sq/ft

Dining Room:

180 sq/ft width 15' x depth 12'

Foyer:

37 sq/ft width 8' x depth 4' 8"

Garage:

677 sq/ft width 23' 4" x depth 23' 10"

Great Room:

309 sq/ft width 16' 10" x depth 18' 4"

Kitchen:

165 sq/ft width 15' x depth 11'

Master Bedroom:

221 sq/ft width 17' x depth 13'

Study/ Bedroom 4:

147 sq/ft width 13' 4" x depth 11'

Utility Room:

49 sq/ft width 6' 2" x depth 8'

See a sample planset

• Cover Sheet - A rendering of the front exterior of the house.
• Foundation Plan - This plan gives the foundation layout, including support walls, excavated and unexcavated areas, if any, foundation notes and details, and floor framing.
• Detailed Floor Plans - These plans show the layout of each floor of the house. Rooms and interior spaces are carefully dimensioned and keys are given for cross-section details provided later in the plans, as well as window and door schedules. These plans may also show the location of kitchen appliances and plumbing fixtures, and may suggest locations for electrical fixtures, switches and outlets.
• Interior Elevations - The interior elevation drawings show a suggested layout design of cabinets, utility rooms, fireplaces, bookcases, built-in units and other special interior features depending on the nature and complexity of the item.
• Roof Plan - The roof plan shows a bird's eye view of the overall layout of the roof, ridges, valleys, and slopes.
• Door and window schedules - Sizes, quantities and descriptions of all doors and windows shown on the plan.
• Exterior Elevations - Included are front, rear, left and right sides of the house. Exterior materials, details and measurements are also given.
• Cross-Section / Wall Section Details - Important changes in floor, ceiling and roof heights or the relationship of one level to another are called out. Also shown, when applicable, are exterior details such as railing and banding.
• Structural Plan - Overall layout and necessary details for the ceiling, second-floor framing (if applicable) and roof construction. If trusses are used, it's suggested that you use a local truss manufacturer to design your trusses to comply with your local codes and regulations.
• Each plan is designed to be consistent with CABO One and Two Family Dwelling Code or the International Residential Code in effect at the time the plan was created. Modifications may be necessary to meet applicable building codes, ordinances, local climatic, and geographical design criteria. Consult a builder, architect or other construction professional as necessary. Manufacturer instructions should be followed for all materials, appliances, and systems. Heating/air conditioning layouts, plumbing pipe layouts, and electrical wiring layouts are not included. Consult a local mechanical contractor for systems suitable for local climate conditions.